Ceramic tile does not do the United States to sew directly, clean the job cannot ignore, clear clean ability has good result
Home decoration will be used in many places tile, tile shop paste will have cracks, if you do not give it a seam treatment, soon the cracks will accumulate to dust, let the whole ground or wall become dirty will also affect the health. Making the seams will not only make the whole beautiful, but also reduce the accumulation of dust in the cracks. But the seams can not be done casually. How can the sanitary cleaning of the cracks be done before the seams are made, and how can the seams be done to have good results?
First, clean the gap
Before making the seams, the cracks should be cleaned with cleaning tools to ensure that there are no large pollutants and dust in the cracks.
2. To use the same tools to clean up the gap at the bottom of the screwdriver, handle in front of the screw to loose, then sew is suitable for the clear aperture size head inserted into the handle, and then plow forward with 45 degree Angle, aperture to clean 3 mm depth, and then you can use clean shovel or wallpaper knife to side wall and the surface of ceramic tile do processing.
3. The order of cleaning the brick joints is from inside to outside, from the wall tiles to the floor tiles, and the special cleaning blade is used to clean the cracks at a 45 degree Angle.
4. After the gap is cleaned, you can brush back with a brush to gather the dust on both sides to the center of the tile. After cleaning these dirt, you can start playing.
Second, the seam
After the tile paving must do the United States sewing treatment, the United States sewing to the glue gun, wallpaper knife and bucket and other things ready.
2. Ceramic tile seaming should not only choose good quality style, but also choose the color consistent with the home tile, so that the overall effect of decoration will be good.
3. When the sealant is used, first make a small hole on the bottle mouth, and then install the material mouth on the top, and then cut it into a 45 degree Angle. If the gap of the ceramic tile is large, the material mouth can be slightly eliminated, and then used.
4. Enter decorate scene to clean health first, you can use the blade gap and some other parts of the filler to clean enough to let the floating dust of the ground without a, then with a wet sponge to ceramic tile aperture all around good clean, make sure no dust, tile around to use the seam an agent evenly into the ceramic tile aperture.
5. Use sealant to scrape the sealant within a distance of about 1 meter. If there is a slight leakage of sealant, use a sponge to wipe the excess sealant clean, and wipe it several times more. In order to make the sponge more practical, be sure to clean with water several times. After the joint of an area is done, it can be done again from scratch to ensure the quality of the entire construction.
6. When the ceramic tile is sewn, we must pay attention to ensure that the overall flatness will not rise, and there can be no bubble generation, and the surface of the ceramic tile can not have excess seaming agent. After the whole seaming is done, we must ensure the cleanliness of the ground.
7. If the beauty of ceramic tile seam is yourself, afraid there will be extra overflow also handles don’t clean the seam an agent, you can choose to use post on the edge of the brick joints of crepe paper, with a glue gun to do material after processing, and then use the extra dye scraper to clean scratches, the material such as dry repair is completed, you can give is removed the crepe paper.
Home decoration will do the sewing processing as long as the use of ceramic tile, but before making the joint processing must be to do a good job in gap health clean, to ensure that cracks without any dust and dirt, so as to ensure that the beautiful sex and practicability of the seam, but also conducive to the use effect of late, more can save a lot of the use of ceramic tile adhesive. Home ceramic tile in the United States sewing processing, we must pay attention to these problems.